Toro 20073 - Lawn Mower Setup and Preparation; Unfolding the Handle

Setup
Important: R emo v e and discard the pr otecti v e
plastic sheet that co v er s the engine.
1. Unfolding the Handle
F olding or unf olding the handle impr oper l y can
dama ge the ca bles, causing an unsafe operating
condition.
• Do not dama ge the ca bles when f olding or
unf olding the handle.
• If a ca ble is dama ged, contact an Authoriz ed
Ser vice Dealer .
1. Carefully mo v e the upper handle forw ard until the
handle halv es are in line and nest tog ether , and tighten
the handle knobs ( Figure 3 ).
Figure 3
2. Squeeze the lo w er handle tog ether and mo v e the handle
rearw ard until it clic ks into the operating position
( Figure 4 ).
Figure 4
6