Toro 20197 - Mower Setup Procedures; Unfolding and Adjusting the Mower Handle; Filling the Engine with Oil

Setup
1
UnfoldingtheHandle
NoPartsRequired
Procedure
1.Movethehandlerearwardandholdtheupperhandle
inplace(Figure3).
Figure3
Note:Thehandlewillclickintoposition.
2.Tightentheupperhandleknobastightasyoucan
(
Figure4).
Figure4
2
FillingtheEnginewithOil
Partsneededforthisprocedure:
0.58
quart
(0.55l)
SAE30detergentoilwithanAPIserviceclassication
ofSH,SJ,SL,orhigher(notsuppliedwiththemower).
Procedure
Important:Yourmower does not comewithoil
intheengine.
1.Removethedipstick(
Figure5).
Figure5
2.Slowlypouroilintotheoillltube,periodically
checkingthelevelwiththedipstick,untilthedipstick
indicatesthattheengineisfullasillustratedin
Figure5.Donotoverll.(Max.ll:0.58quart(0.55
l),type:SAE30detergentoilwithanAPIservice
classicationofSH,SJ,SL,orhigher.)
Note:Eachtimeyouchecktheoillevel,removethe
dipstickandwipeitclean,insertitintotheoilller
neck(butdonotscrewitin),thenremoveitagain
andcheckthelevel(
Figure5).
5