Toro 22215 - Fuel and Blade-Drive System Servicing

ChangingtheFuelFilter
ServiceInterval:Every100hours
1.Shutofftheengineandwaitforallmovingparts
tostop.
2.Disconnectthewirefromthesparkplug.
3.Closethefuel-shutoffvalve(Figure30).
g277609
Figure30
1.Fuellter(notshown)
2.Fuel-shutoffvalve
4.Removethefuellter(Figure30)fromthefuel
linebylooseningthetubeclampssurrounding
thefuellter.
5.Installanewfuellterinthefuellineusingthe
tubeclampsthatyouremovedinstep4.
ServicingtheBlade-Drive
System
ServiceInterval:Aftertherst5hours
Every50hours—Removedebrisfromunder
thebeltcover.
Every50hours—Servicetheblade-drive
system.
1.Loosenthe2quarter-turnfastenersonthe
belt-cover-accesspanelandremovethepanel
(Figure31).
g208925
Figure31
1.Belt-tensionspring5.Blade-drivebelt
2.Adjustingbolt6.Wall
3.Gap
7.Beltcover
4.Adjustingnut8.Belt-cover-accesspanel
2.Brushorblowoutdebrisfromtheinsideofthe
beltcoverandaroundalltheparts.
3.Holdafeelergaugesetbetween0.13and0.76
mm(0.005and0.03inches)againstthewall
andslideitdownbehindthebelttensionspring;
refertoFigure32.
decal116-8528
Figure32
1.ReadtheOperator’s
Manualbeforeperforming
anymaintenance.
2.Checkbelttensionevery
50hours.
Note:Ifthereisavisiblegapbetweenthe
gaugeandthespring,tightentheadjustingbolt
andthenutuntilthefeelergaugebarelyslides
freelyinandoutofthegap(Figure31).
Important:Donotovertightentheadjusting
bolt.Thiscoulddamagetheblade-drivebelt.
4.Installthebelt-cover-accesspanel.
25