Toro 22215 - Transmission Belt Service

g208923
Figure44
1.Markthecablehere
g208920
Figure45
1.Slack—11mm(7/16inch)
8.Torquethecable-clampscrewto11to14N∙m
(99to121in-lb)tolocktheadjustmentinplace.
9.Installthebeltcoverwiththe4boltsthatyou
removedinstep3.
10.Connectthewiretothesparkplug.
11.Checktheoperationoftheblade-brakeclutch.
ChangingtheTransmission
Belt
ServiceInterval:Every250hours
RemovingtheTransmissionBelt
Note:Retainallhardwareremovedinthisprocedure,
excepttheoldtransmissionbelt,forinstallationin
InstallingtheTransmissionBelt(page32).
1.Shutofftheengineandwaitforallmovingparts
tostop.
2.Disconnectthewirefromthesparkplug.
3.Removethe4boltsthatholdthebeltcoverto
themachinehousing.
4.Removethebeltcover.
5.Removeanydebrisfromunderthebeltcover.
6.Ifthegrassbagisonthemachine,removeit.
RefertoRemovingtheGrassBag(page17).
7.Raiseandholdupthereardeector.
8.Removetherear-viewingwindow,locatedunder
therear-dischargedeector,byremovingthe
boltholdingitinplace(Figure46).
g280620
Figure46
1.Rear-viewingwindow2.Rear-viewing-windowbolt
9.Removethedustshieldbyremovingthe2bolts
holdingitinplace(Figure47).
g280624
Figure47
1.Trailingshield2.Trailing-shieldbolts
31