Toro 22215 - Adjusting the Blade-Brake Cable

g208922
Figure41
1.BBCbelt2.BBCbeltguard
8.RemovetheBBCbeltfromthebrake-drum
pulleyandthenremovethebeltfromthe
machine.
Note:Holdoneofthebladesusingagloveor
aragandturnthebladespindletohelpremove
theBBCbelt.
9.ToinstallanewBBCbelt,reversethesteps
above.
10.AdjusttheBBCcable;refertoAdjustingthe
Blade-BrakeCable(page30).
AdjustingtheBlade-Brake
Cable
Adjusttheblade-brakecablewheneveryouinstalla
newcableorreplacetheBBCbelt.
1.Shutofftheengineandwaitforallmovingparts
tostop.
2.Disconnectthewirefromthesparkplug.
3.Removethebeltcover(Figure6)byremoving
the4boltsthatholdittothemachinehousing.
Note:Savetheboltsforinstallingthebeltcover
tothemachinehousing.
4.Removeanydebrisfromunderthebeltcover.
5.Loosenthecable-clampscrew(Figure42).
g208921
Figure42
1.Cable-clampscrew
2.Blade-brakecable
6.Pullthecablejackettoremoveslack(Figure43).
Note:Donotputtensiononthespring.
g208926
Figure43
1.Cableclamp2.Spring
7.Markthebrakecable(Figure44),thenadjust
thejacketuntilthereisapproximately11mm
(7/16inch)ofslack(Figure45).
30