Toro 22336 - Moving a Non-Functioning Traction Unit; Using the Cylinder Locks

Achildoruntrainedbystandercouldattemptto
operatethetractionunitandbeinjured.
Removethekeyfromtheswitchwhenleaving
thetractionunit,evenifjustforafewseconds.
MovingaNon-functioning
TractionUnit
Important:Donottoworpullthetraction
unitwithoutrstopeningthetowvalves,orthe
hydraulicsystemwillbedamaged.
1.Stoptheengine.
2.Removetheplugcoveringeachtowvalve,located
undereachfueltank(Figure19).
Figure19
1.Towvalve2.Plug
3.Loosenthejamnutoneachtowvalve.
4.Turneachvalvecounterclockwiseoneturnwitha
hexwrenchtoopenthem.
5.Towthetractionunitasrequired.
Important:Donotexceed3mphwhentowing.
6.Whenyouhaverepairedthetractionunit,closethe
towvalvesandtightenthejamnuts.
Important:Donotovertightenthetowvalves.
7.Replacetheplugs.
UsingtheCylinderLocks
Theloaderarmsmaylowerwhenintheraised
positioncrushinganyoneunderthem.
Installthecylinderlocksbeforeperforming
maintenancethatrequiresraisedloaderarms.
InstallingtheCylinderLocks
1.Starttheengine.
2.Raisetheloaderarmstothefullyraisedposition.
3.Stoptheengine.
4.Positionaloaderarmcylinderlockovereachlift
cylinderrod(Figure20).
5.Secureeachloaderarmcylinderlockwithaclevis
pinandcotterpin(Figure20).
Figure20
1.Cylinderlock4.Clevispin
2.Liftcylinder5.Liftcylinderrod
3.Hairpincotter
6.Withtheengineoff,lowertheloaderarms.
Removing/StoringtheCylinderLock
1.Starttheengine.
2.Raisetheloaderarmstothefullyraisedposition.
3.Stoptheengine.
4.Removetheclevispinandcotterpinsecuringeach
cylinderlock.
5.Removethecylinderlocks.
6.Lowertheloaderarms.
7.Installthecylinderlocksoverthehydraulichoses
andsecurethemwiththeclevispinsandcotterpins
(Figure21).
23