Toro 23210 - Checking the Engine Oil Level; Checking the Hydraulic Fluid Level

FillingtheFuelTank
1.Parkthemachineonalevelsurface,lowerthe
grinder,andstoptheengine.
2.Removethekeyandallowtheenginetocool.
3.Cleanaroundthefueltankcapandremoveit
(
Figure16).
Figure16
1.Fueltankcap
4.Addunleadedgasolinetothefueltank,untilthe
levelis1/4to1/2inchbelowthebottomofthe
llerneck.
Important:Thisspaceinthetankallows
gasolinetoexpand.Donotllthefueltank
completelyfull.
5.Installthefueltankcapsecurely.
6.Wipeupanygasolinethatmayhavespilled.
CheckingtheEngineOilLevel
ServiceInterval:Beforeeachuseordaily
1.Parkthemachineonalevelsurface,lowerthe
grinder,andstoptheengine.
2.Removethekeyandallowtheenginetocool.
3.Cleanaroundtheoildipstick(
Figure17).
Figure17
1.Oilllerhole
3.Fullmark
2.Oildipstick
4.Addmark
4.Removethedipstickandwipetheendclean
(Figure17).
5.Slidethedipstickfullyintothedipsticktubewithout
threadingitintothellerneck(Figure17).
6.Pullthedipstickoutandlookattheend.The
oilshouldbebetweentheAddandFullmarks
(
Figure17).
7.IftheoilisbelowtheAddmark,add10w30engine
oiltothellerhole,checkingthelevelfrequently
withthedipstick,untiltheoillevelreachestheFull
mark.
8.Replacethedipstick.
CheckingtheHydraulicFluid
Level
ServiceInterval:Every25hours
HydraulicTankCapacity:6USgallons(23l)
RefertoChangingtheHydraulicFluid(page35)for
hydraulicuidspecications.
1.Parkthemachineonalevelsurfaceandlowerthe
grinder.
2.Stoptheengine,removethekey,andallowthe
enginetocool.
3.Lookintotheglassbubbleontherightsideofthe
machine.Ifyoucannotseehydraulicuidinthe
bubble,continuethisproceduretoadduid.
16