Toro 23210 - Securing the Machine for Transport; Lifting the Machine; Operating Tips

Figure22
3.Startthegrinderandwaitforittogetuptofull
speed.
4.Usethegrindercontrollevertoswingthegrinder
slowlyacrossthefaceofthestump,cuttingawaya
swathofchips(Figure22).
Important:Donotforcethegrindertomove
toofast.Insteadallowittocutthroughthe
woodwithoutboggingdownorlosingspeed.
5.Movethemachineforwardafewinchesandrepeat
step4(Figure22).
6.Repeatsteps4through5untilyouhavegroundoff
theentirefaceofthestump(Figure22).
7.Backupthemachine,positionthegrindertothe
sideofthefrontofthestump,andlowerittoabout
aninchbelowthesurface.
8.Repeatsteps4through7untilthestumpisground
away.
9.Ifthereareanylargerootstobeground,position
thegrinderovereachrootandusethetraction
controlandgrindercontroltomovethegrinder
alongtheroot,grindingitaway.
SecuringtheMachinefor
Transport
Whentransportingthemachineonatrailer,alwaysuse
thefollowingprocedure:
Important:Donotoperateordrivethemachine
onroadways.
1.Stoptheengine.
2.Lowerthegrinder.
3.Securethemachinetothetrailerwithchainsor
strapsusingthetie-down/liftloopsatthefrontand
rearofthemachine(
Figure23andFigure24).Refer
toyourlocalordinancesfortrailerandtie-down
requirements.
Figure23
1.Fronttie-downloop
Figure24
1.Reartie-downloops
LiftingtheMachine
Youcanliftthemachineusingthetie-down/liftloops
asliftpoints(Figure23andFigure24).
OperatingTips
•Cleantheareaoftrash,branchesandrocksbefore
operatingtopreventequipmentdamage.
•Alwaysusefullthrottle(maximumenginespeed)
whengrinding.
19