Toro 23518 - Page 37

CHASSIS
3-9
Toro 30” Aerator Service Manual
3
11. Pack the pivot tube tapered roller bearings with high
temperature grease (Fig. 033).
13. Install grease seal into the base of the pivot tube
(Fig. 035).
Fig. 033 DSCN-0407a
12. Install the lower bearing into the pivot tube (Fig.
034).
Fig. 034 DSCN-0416a
Fig. 035 DSCN-0414a
14. Install the upper bearing into the pivot tube (Fig.
036).
Fig. 036 DSCN-0418a