Toro 25450A - Servicing the Transmission

6.Filltheaxleswiththespeciedoilthroughthesight
portuntiltheoilislevelwiththethreadsatthebottom
oftheport(Figure95andFigure96).
7.Waitafewminutesfortheoiltosettle,thenaddmore
oilasnecessary.
Note:Continuetoaddoiluntiltheoillevelstabilizes
andisatthebottomofthethreadsofthesightport.
8.Installthellplugsintothesightportsofthepinion
housingsfortheaxles(Figure95andFigure96).
CleaningtheAxleBreathers
ServiceInterval:Every1,000hours
1.Cleantheareaaroundthebreatherswithacleaning
solvent(Figure97andFigure98).
Figure97
1.Breathertting
2.Frontaxle
Figure98
1.Breathertting
2.Rearaxle
2.Removethebreathersfromthefrontaxleandrear
axles(Figure97andFigure98).
3.Cleanthebreatherswithacleaningsolvent.
4.Usecompressedairtodrythebreathers.
Important:Wearfaceprotectionwhenusing
compressedair.
5.Installthebreathersintothefrontandrearaxles(Figure
97andFigure98).
ServicingtheTransmission
Transmission-oilspecication:Mobiluid424
CheckingtheOilLevelinthe
Transmission
ServiceInterval:Every100hours
Important:Ifyouoperatethemachinewhilethelevelof
thetransmissionoilisbelowtherecommendedlevel,you
maydamagethetransmissionandtheparkingbrake.
1.Parkthemachineonalevelsurface.
2.Starttheengineandrunitfor10minutes.
3.Stoptheengineandremovetheignitionkey.
4.After5minutes,checkthetransmissionoillevelinthe
sightgauge(Figure99).
Note:Theoillevelshouldcover1/2to3/4ofthe
sight-gaugewindow .
Figure99
1.Sightgauge
5.Iftheoillevelislow,addthespeciedoilintothe
transmission;refertoFillingtheTransmissionwithOil
(page63).
6.Repeatsteps2through5untiltheoillevelcovers1/2
to3/4ofthesight-gaugewindow(Figure99).
Note:Asyouaddoiltothetransmission,perform
steps2through4todeterminethecorrectedoillevel.
62