Toro 30308 - Page 285

TestingtheHighTemperatureShutdownSwitch(continued)
9.Afteryoucompletethetesting,installthetemperatureswitchtotheengine
housing,dothefollowingsteps:
A.Cleanthethreadsofthehousingandswitch.Applythreadsealantto
thethreadsoftheswitch.
B.Threadtheswitchintothehousing;torquetheswitchto29.4to39.2
N∙m(22to28ft-lb).
C.Connecttheharnesswirestothetemperatureswitch.
10.Filltheenginecoolingsystem;refertotheTractionUnitOperator’sManual.
11.Lowerthehoodandsecureitwiththelatches.
Groundsmaster
®
3280-D/3320
Page6–57
ElectricalSystem:TestingtheElectricalComponents
05138SLRevB