Toro 31051 - Page 308

RemovingtheHopperAssembly(continued)
5.Removethebolt(1)andwasher(2)thatsecuresthepin(3)tothemachine
frame.
6.Supportthehopperassemblybeforeremovingthepin(8).
7.Slideandremovethepin(3)thatsecuresthehopperassemblytothe
machineframe.
Note:Twopeoplearerequiredtoliftthehopperassemblyfromthemachine.
8.Liftandremovethehopperassemblyfromthemachine.
9.Ifrequired,disassemblethehopperframeassemblyasrequired;referto
DisassemblingtheHopperFrameAssembly(page9–7).
InstallingtheHopperAssembly
1.Ifdisassembled,assemblethehopperframeassembly;refertothe
AssemblingtheHopperFrameAssembly(page9–7).
2.Positionthehopperassemblyontothemachine.Makesurethatthehopper
assemblyisproperlyseatedinitspositiontoattachwiththefasteners.
3.Applyacoatofgreasetothepin(3).
4.Slidethepin(3)andsecurethehopperassemblytothemachineframe.
5.Securethepin(3)withthewasher(2)andbolt(1).
6.Positionthehydrauliccylinders(8)ontothehopperassemblyandsecure
withthebolt(9)andnut(10).
7.Connectthehoppermicroswitchconnectortothemachinewireharness
connector.
8.Checkandalignthehopperassemblytothechuteseal;refertoOperator’s
Manual.
9.Lubricatethegreasettings;refertoOperator’sManual.
10.Checkforcorrectoperationofthehopperassemblyandadjustthehopper
assemblysensor;refertoOperator’sManual.
HopperAssembly:ServiceandRepairs
Page9–4
ProLineH800
19241SLRevB