Toro 36002 - Inspecting the Throwing Edges; Changing the Engine Oil

InspectingtheThrowing
Edges
ServiceInterval:Yearly—Inspectthethrowingedgesand
haveanAuthorizedServiceDealer
replacethethrowingedgesandscraper
ifnecessary.
Beforeeachsession,inspectthethrowingedgesforwear.
Whenathrowingedgehasworndowntothewear-indicator
hole,haveanAuthorizedServiceDealerreplacethethrowing
edges().
Figure17
1.Thewear-indicatorhole
isintact;youdonotneed
toreplacethethrowing
edges.
2.Thewear-indicatorhole
isexposed;replaceboth
throwingedges.
ChangingtheEngineOil
ServiceInterval:Aftertherst2hours
Yearly
Ifpossible,runtheengineforafewsecondsbeforechanging
theoilbecausewarmoilowsbetterandcarriesmore
contaminants.
UseautomotivedetergentoilwithanAPIserviceclassication
ofSJ,SL,orhigher.
UseFigure18toselectthebestoilviscosityfortheoutdoor
temperaturerangeexpected:
Figure18
EngineOilCapacities
ModelMaxFill
36002
0.5L(16.9oz)
36003
0.7L(23.7oz)
1.Movethemachinetoalevelsurface.
2.Placeanoil-drainpanundertheoil-drainplug,remove
theoil-drainplug,andtipthemachinebackwardand
draintheusedoilintheoil-drainpan(Figure19).
Figure19
1.Oil-drainplug
3.Afterdrainingtheusedoil,returnthemachinetothe
operatingposition.
4.Installtheoil-drainplugandtightenitsecurely.
5.Cleanaroundtheoil-llcap.
6.Fillthecrankcasewithoil.
A.Removethedipstickandslowlypouroilintothe
oil-lltubetoraisetheoilleveltotheFullmark
onthedipstick(Figure20).Donotoverll.
15