To Next PageTo Next Page
Need help?Do you have a question about the Toro 37779 and is the answer not in the manual?
General| Brand | Toro |
|---|---|
| Model | 37779 |
| Category | Snow Blower |
| Language | English |
Essential safety checks and precautions before starting the machine.
Explanation of symbols and text on safety and instruction decals.
Checklist to ensure all provided parts are present before assembly.
Procedure for attaching the upper handle assembly to the main unit.
Connecting the control linkage for speed adjustment.
Mounting the snow discharge chute onto the machine.
Connecting the rod that controls chute direction.
Procedure for verifying and topping up engine oil.
Instructions for setting the correct tire pressure.
Inspecting and adjusting ground-engaging components.
Verifying the proper function of the self-propel system.
Key safety measures before starting the engine.
Precautions and steps for adding fuel to the machine.
Safety rules to follow while the machine is running.
How to switch between powered and manual movement.
Step-by-step guide to starting the snowthrower's engine.
Procedures for safely shutting down the engine.
How to engage and control the machine's movement.
Adjusting the machine's speed for different conditions.
Engaging the snow-throwing mechanism.
Using the control for chute and deflector adjustment.
Methods for clearing snow blockages from the chute.
Advice for efficient and safe operation.
Steps to avoid components freezing in cold conditions.
Intervals and tasks for regular servicing.
Safety rules to follow during maintenance.
Steps to take before starting any maintenance task.
Daily or pre-operation check of engine oil.
Fine-tuning ground clearance for different surfaces.
Ensuring proper engagement of the drive system.
Ensuring proper engagement of the snow-throwing system.
Inspecting and maintaining the gearbox lubrication.
Procedure for replacing used engine oil.
Applying lubricant to the hex shaft for smooth operation.
Instructions for installing a new spark plug.
Ensuring the chute locks securely in place.
Information on when to replace worn or damaged drive belts.
Steps to ready the machine for long-term storage.
Procedures for getting the machine ready after storage.
