Toro 37797 - Adjusting the Discharge-Chute Latch; Replacing the Drive Belts; Replacing the Headlight Bulb

g016645
Figure41
1.Spark-plugboot
2.Cleanaroundthebaseofthesparkplug.
g016646
Figure42
3.Removeanddiscardtheoldsparkplug.
Note:Youwillneedaratchetwrenchextension
toremovethesparkplug.
4.Setthegapbetweentheelectrodesonanew
sparkplugat0.76mm(0.030inch)asshown
inFigure43.
g001029
Figure43
1.0.76mm(0.030inch)
5.Installthenewsparkplug,tightenitrmly,and
attachtheignitionwiretothesparkplug.
Note:Ensurethattheignitionwiresnaps
completelyintoplaceonthesparkplug.
Adjustingthe
Discharge-ChuteLatch
Ifthedischargechutedoesnotlockintothedesired
positionordoesnotunlocksothatyoucanmoveitto
anotherposition,adjustthedischarge-chutelatch.
1.Loosentheclampfasteneronthechute-support
plateuntilthecableisfree.
g019021
Figure44
1.Cableconduit3.Clampfastener
2.Cableclamp
2.Removeanyslackinthecablebypullingthe
cableconduitrearward.
3.Tightentheclampfastenerwhileholdingthe
cableinplace.
ReplacingtheDriveBelts
Iftheauger/impellerdrivebeltorthetraction-drivebelt
becomesworn,oil-soaked,orotherwisedamaged,
haveanAuthorizedServiceDealerreplacethebelt.
ReplacingtheHeadlight
Bulb
UseaTorolightbulborequivalent(GE89937W
halogenbulb).Donottouchthebulbwithyourhands
orallowdirtormoisturetocomeintocontactwiththe
bulb.
1.Removethewireconnectorfromthebackofthe
headlight(Figure45).
21