Toro 38614 - Replacing the Drive Belts; Replacing the Headlight Bulb

Figure60
1.Dischargechutelatch
2.Gearteeth
Note:Thelatchisspringloadedandwillnaturally
moveintotheteethofthegear(
Figure60).
4.Removeanyslackinthecablebypullingthecable
conduitrearward.
5.Tightentheboltonthecableclamp.
6.Installandsecurethegearcover.
ReplacingtheDriveBelts
Iftheauger/impellerdrivebeltorthetractiondrivebelt
becomesworn,oil-soaked,orotherwisedamaged,go
towww .Toro.comforadditionalserviceinformationor
haveanAuthorizedServiceDealerreplacethebelt.
ReplacingtheHeadlightBulb
UseaGE89216Whalogenlightbulb.Donottouch
thebulbwithyourhandsorallowdirtormoistureto
comeintocontactwiththebulb.
1.Removethewireconnectorfromthebackofthe
headlight(
Figure61).
Figure61
2.Turnthebaseofthebulbcounterclockwiseuntilit
stops(Figure62).
Figure62
3.Removethebulbstraightoutfromthebackofthe
headlight(Figure63).
Figure63
4.Insertanewbulbintothebackoftheheadlight
(Figure64).
Figure64
5.Turnthebaseofthebulbclockwiseuntilitissnug
(Figure65).
Figure65
6.Insertthewireconnectorstraightintothebackof
theheadlightuntilitissecurelyinplace(Figure66).
27