112-6626
1. Traction drive—squeeze the lever to engage;
release the lever to disengage.
3. Cutting/dismemberment hazard,
impeller—do not place your hand in the
chute; stop the engine before leaving the
operator’s position, use the tool clear the
chute.
5. Thrown object hazard—keep bystanders a
safe distance from the snowthrower.
2. Warning—read the Operator’s Manual.
4. Cutting/dismemberment hazard,
impeller—keep away from moving parts;
remove the ignition key and read the
instructions before servicing or performing
maintenance.
6. Auger/impeller drive—squeeze the lever to
engage; release the lever to disengage.
1. Warning—hot surface, do not touch
Tecumseh Part No. 36501
1. Primer
Tecumseh Part No. 35077
1. Key ignition
5. Increasing scale
2. Engage to start the engine 6. Slow
3. Disengage to stop the engine 7. Stop the engine
4. Fast
5
To Next Page
Loading...
