EasyManua.ls Logo

Toro 41564 - Page 28

Toro 41564
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
MAINTENANCE SCHEDULE
Inspect Air Filter, Dust Cap, and Baffle
Lubricate All Grease Fittings
Check Battery Fluid Level
Check Battery Cable Connections
Change Engine Oil and Filter
Inspect Cooling System Hoses
Check Fan and Alternator Belt Tension
Service Air Filter
Replace Hydraulic Filter
Check Front Wheel Toe-In and Steering Linkage
Torque Wheel Lug Nuts
Check Governor Oil Level
Lubricate Throttle and Governor Linkage
Solenoid Valve Maintenance
Change Fuel Filters
Inspect Fuel Lines and Connections
Check Rear Planetary Gear Lube
Change Hydraulic Oil
Change Hydraulic Oil Filter
Flush Cooling System and
Replace Coolant
Drain and Clean Fuel Tank
Change Rear Planetary Gear Lube
Pack Front Wheel Bearings
*
*
*
*
**
**
Initial break-in at 10 hours
Initial break-in at 50 hours
Initial break-in at 200 hours
Maintenance Procedure
Minimum Recommended Maintenance Intervals:
Maintenance Interval & Service
"A" Level
Service
"B" Level
Service
"C" Level
Service
"D" Level
Service
Every
50 hrs.
Every
100 hrs.
Every
200 hrs.
Every
400 hrs.
Recommendations:
Replace Safety Switches
Items listed are recommended every 800
hours or 2 years, whichever occurs first.
*

Related product manuals