Toro 74765 - Stopping the Machine; Adjusting the Height of Cut; Positioning the Seat; Adjusting the Motion-Control Levers

StoppingtheMachine
Tostopthemachine,movethemotion-controlleversto
theNEUTRALpositionandoutwardtothePARKposition,
disengagetheblade-controlswitch,ensurethethrottleis
betweenhalfandfullthrottle,andturntheignitionkeytothe
OFFposition.Removethekeyfromtheignitionswitch.
WARNING
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemowerwhileitis
unattended.
Alwaysremovetheignitionkeyandmovethe
motion-controlleversoutwardtothePARKposition
whenleavingthemachineunattended,evenifjust
forafewminutes.
AdjustingtheHeightofCut
Note:Thetransportpositionisthehighestheight-of-cut
positionorcuttingheight115mm(4.5inches)asshownin
Figure18.
Heightofcutiscontrolledbytheleverlocatedtotherightof
theoperatingposition(Figure18).
Figure18
PositioningtheSeat
MovetheseatforwardorbackwardasshowninFigure19.
g027249
B
C
A
Figure19
AdjustingtheMotion-Control
Levers
AdjustingtheHeight
Youcanadjustthemotion-controllevershigherorlowerfor
maximumcomfort(Figure20).
g027252
B
A
Figure20
20