Toro 74891 - Adjusting the Motion-Control Levers; Pushing the Machine by Hand

AdjustingtheMotion-Control
Levers
AdjustingtheHeight
Note:Repeattheadjustmentfortheoppositecontrollever.
Themotion-controlleverscanbeadjustedhigherorlowerfor
maximumoperatorcomfort(Figure27).
g027252
B
A
Figure27
AdjustingtheTilt
Themotion-controlleverscanbetiltedforwardorrearward
formaximumoperatorcomfort.
1.Loosentheupperboltholdingthecontrollevertothe
control-armshaft.
2.Loosenthelowerboltjustenoughtopivotthecontrol
leverforwardorrearward.
3.Tightenbothboltstosecurethecontrolinthenew
position.
4.Repeattheadjustmentfortheoppositecontrollever.
PushingtheMachinebyHand
Important:Alwayspushthemachinebyhand.Never
towthemachinebecausedamagemayoccur.
1.Parkthemachineonalevelsurfaceanddisengagethe
blade-controlswitch.
2.Engagetheparkingbrake.
3.Movethemotion-controlleversoutwardtothe
NEUTRAL-LOCKposition,shutofftheengine,remove
thekey,andwaitforallmovingpartstostopbefore
leavingtheoperatingposition.
4.Locatethebypassleversattherearofthemachine,on
theleftandrightsideoftheframe.
5.Movethebypassleversrearwardandthendowntolock
theminplacetodisengagethewheelmotors(Figure
28).
Note:Ensurethattheleftandrightbypassleversare
rearwardandlockedbeforemovingthemachine.
BA
DC
g027642
Figure28
6.Disengagetheparkingbrake.
OperatingtheMachine
Movethebypassleverstothepositionforoperatingthe
machine(Figure28)toengagethewheelmotors.
24