Toro 74909TE - Checking the Wheel Lug Nuts; Checking the Wheel-Hub Slotted Nut; Adjusting the Caster-Pivot Bearing

CheckingtheWheelLugNuts
Checkandtorquethewheellugnutsto122to129N∙m(90
to95ft-lb).
CheckingtheWheel-Hub
SlottedNut
ServiceInterval:Aftertherst100hours
Every500hours
Checkandensurethatthetorqueoftheslottednutis286to
352N∙m(211to260ft-lb).
Note:Donotuseanti-seizecompoundonthewheelhub.
g035395
1
Figure73
1.Slottednut
AdjustingtheCaster-Pivot
Bearing
ServiceInterval:Every500hours/Yearly(whichevercomes
rst)
1.Disengagetheblade-controlswitch(PTO),movethe
motion-controlleverstotheNEUTRAL-LOCKposition,
andsettheparkingbrake.
2.Shutofftheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Removethedustcapfromcasterandtightenthe
locknut(Figure74).
4.Tightenthelocknutuntilthespringwashersareat,
andthenbackoffa1/4turntoproperlysetthepreload
onthebearings(Figure74).
Important:Makesurethatthespringwashersare
installedcorrectlyasshowninFigure74.
5.Installthedustcap(Figure74).
Figure74
1.Springwashers
3.Dustcap
2.Locknut
49