Toro 74909TE - Brake Maintenance; Adjusting the Parking Brake

1
Figure83
1.Hydraulicdipstick
7.Lowerandpositiontheseat.
BrakeMaintenance
AdjustingtheParkingBrake
ServiceInterval:Aftertherst100hours
Every500hoursthereafter
1.Drivethemachineontoalevelsurface.
2.Disengagetheblade-controlswitch(PTO),movethe
motion-controlleverstotheNEUTRAL-LOCKposition,
andengagetheparkingbrake.
3.Shutofftheengine,waitforallmovingpartstostop,
andremovethekey.
4.Raisethebackofthemachineandsupportthemachine
withjackstands.
DANGER
Mechanicalorhydraulicjacksmayfailto
supportmachineandcauseaseriousinjury.
•Useajackstandwhensupportingthe
machine.
•Donotusehydraulicjacks.
5.Removethereartiresfromthemachine.
6.Removeanydebrisfromthebrakearea.
7.Rotatethedrive-wheelreleasehandletothereleased
position.RefertoUsingtheDrive-WheelRelease
Valves(page30).
8.CheckifthereisavisiblegapbetweentheL-bracket
andthelinkagestop(Figure84).
Figure84
LeftSideShown
1.L-bracket4.Rear-linkageassembly
2.Linkagestop
5.Caliper
3.Gap
6.Wheelhub
9.Disengagetheparkingbrake.
53