Toro 74915 Z Master G3 - Page 54

Figure83
Topview(underseat)
1.Oilneedstobewithin
knurledsection
2.Dipsticklocations
WARNING
Hydraulicoilescapingunderpressurecan
penetrateskinandcauseinjury.
•Ifhydraulicoilisinjectedintotheskinit
mustbesurgicallyremovedwithinafew
hoursbyadoctorfamiliarwiththistypeof
injury.Gangrenemayresultifthisisnot
done.
•Keepbodyandhandsawayfrompinhole
leaksornozzlesthatejecthighpressure
hydraulicoil.
•Usecardboardorpapertondhydraulic
leaks.
•Safelyrelieveallpressureinthehydraulic
systembeforeperforminganyworkonthe
hydraulicsystem.
•Makesureallhydraulicoilhosesandlines
areingoodconditionandallhydraulic
connectionsandttingsaretightbefore
applyingpressuretohydraulicsystem.
ReplacingtheHydraulicFiltersand
HydraulicOil
ServiceInterval:Every250hours—Changethe
hydraulicltersandhydraulicoil
whenusingMobil
®
1oil.
Every500hours—Changethe
hydraulicltersandhydraulicoil
whenusingToro
®
HYPR-OIL
™
500
hydraulicoil.
Toreplacethehydraulicoil,theltersneedtobe
removed.Replacebothatthesametime.Refertothe
oilspecicationsunderServicingtheHydraulicSystem
forthecorrectoil.
1.Disengagethebladecontrolswitch(PTO),movethe
motioncontrolleverstotheneutrallockedposition
andsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Raisethemachineandsupportitwithjackstands
(
Figure84).
Figure84
1.Jackstands
4.Removeboththemowerbeltandthepumpdrive
belt.Thiswillpreventoilgettingonthebelts.Refer
toBeltsintheMaintenanceSection.
5.Placeadrainpanunderthelter,removetheold
lterandwipethesurfaceclean(Figure85).
54