Toro 74946 - Adjusting the Anti-Scalp Rollers; Adjusting the Flow-Baffle-Cam Locks

AdjustingtheAnti-Scalp
Rollers
Wheneveryouchangetheheight-of-cut,adjusttheheight
oftheanti-scalprollers.
1.Disengagetheblade-controlswitch(PTO),movethe
motion-controlleverstotheNEUTRAL-LOCKposition,
andsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
Figure27
1.Anti-scalproller4.Flangenut
2.Spacer
5.Bolt
3.Bushing
Figure28
1.Anti-scalproller3.Flangenut
2.Bushing4.Bolt
AdjustingtheFlow-Bafe-Cam
Locks
Thisprocedureisapplicableonlytomachineswithow-bafe
locks.Certainmodelshavenutsandboltsinplaceofthe
ow-bafelocksandcanbeadjustedthesame.
Youcanadjustthemower-dischargeowfordifferenttypes
ofmowingconditions.Positionthecamlocksandbafeto
achievethebestqualityofcut.
1.Disengagetheblade-controlswitch(PTO),movethe
motion-controlleverstotheNEUTRAL-LOCKposition,
andsettheparkingbrake.
2.Shutofftheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Toadjustthecamlocks,swingtheleveruptoloosen
thecamlock(Figure29).
4.Adjustthebafeandcamlocksintheslotstothe
desireddischargeow.
5.Swingtheleverbackovertotightenthebafeandcam
locks(Figure29).
6.Ifthecamlocksdonotlockthebafeintoplaceorit
istootight,loosentheleverandthenrotatethecam
lock.Adjustthecamlockuntilyouachievethedesired
lockingpressure.
Figure29
27