Toro 74997 - Mower Deck Height and Roller Adjustments

AdjustingtheHeight-of-CutPin
Adjusttheheight-of-cutfrom25to140mm(1to5-1/2
inches)in6mm(1/4inch)incrementsbymovingtheclevis
pinintodifferentholelocations.
1.MovethetransportlocktotheLOCKposition.
2.Pushonthedeck-liftpedalwithyourfootandraisethe
mowerdecktotheTransportposition(alsothe140
mmor5-1/2inchcutting-heightposition)asshown
inFigure28.
3.Toadjust,rotatethepin90degreesandremovethepin
fromtheheight-of-cutbracket(Figure28).
4.Selectaholeintheheight-of-cutbracketcorresponding
totheheight-of-cutdesired,andinsertthepin(Figure
28).
5.Pushonthedecklift,pullbackonthetransportlock,
andslowlylowerthemowerdeck.
Figure28
1.Deck-liftpedal
3.Transportlock
2.Height-of-cutpin
AdjustingtheAnti-Scalp
Rollers
Wheneveryouchangetheheight-of-cut,itisrecommended
toadjusttheheightoftheanti-scalprollers.
1.Disengagetheblade-controlswitch(PTO),movethe
motion-controlleverstotheNEUTRAL-LOCKposition,
andsettheparkingbrake.
2.Shutofftheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Adjusttheanti-scalprollersasshowninFigure29,
Figure30,andFigure31.
g029955
Figure29
1.Anti-scalproller4.Flangenut
2.Spacer
5.Bolt
3.Bushing
g029956
Figure30
1.Anti-scalproller3.Flangenut
2.Bushing4.Bolt
g029957
Figure31
1.Anti-scalproller4.Flangenut
2.Spacer
5.Bolt
3.Bushing
27