Toro DH 140 - Stopping the Engine; Using the Safety Interlock System

StoppingtheEngine
1.MovethethrottlecontrollevertotheSlow(turtle)
position(Figure11).
Note:Iftheenginebackres,shiftthethrottlecontrol
levertotheFast(rabbit)positionbeforestoppingthe
engine.
2.TurntheignitionkeytotheOffposition(Figure12).
Note:Iftheenginehasbeenworkinghardorishot,
letitidleforaminutebeforeturningtheignitionkeyto
theOffposition.Thisallowstheenginetocoolbefore
youstopit.Youmaystoptheengineinanemergency
byturningtheignitionkeytotheOffposition.
UsingtheSafetyInterlock
System
ServiceInterval:Beforeeachuseordaily
CAUTION
Ifthesafetyinterlockswitchesaredisconnectedor
damaged,themachinecouldoperateunexpectedly,
causingpersonalinjury.
•Donottamperwiththeinterlockswitches.
•Checktheoperationoftheinterlockswitches
dailyandreplaceanydamagedswitchesbefore
operatingthemachine.
•Replaceswitchesevery2yearsregardlessof
whethertheyareoperatingproperlyornot.
UnderstandingtheSafetyInterlock
System
Thesafetyinterlocksystemisdesignedtopreventtheengine
fromstartingunless:
•Youaresittingontheseat.
•Thebrakepedalisdepressed.
•Thebladecontrol(PTO)knobisintheDisengaged
position.
•ThetractioncontrolpedalisinNeutral.
Thesafetyinterlocksystemstopstheengineifyourisefrom
theseatandthetractioncontrolpedalisnotintheNeutral
position,theparkingbrakeisnotset,orthebladecontrol
(PTO)knobisintheEngagedposition.
Thesafetyinterlocksystemisdesignedtostopthemowerif:
•YoushiftintoReversewiththeblades(PTO)engaged.
•Youremovethebagordumpthegrass.
SettingtheKeyChoice
®
Switchto
OperateinReverse
Theinterlockfeatureonthemachinepreventsthepower
take-off(PTO)fromoperatingwhenyoubackupthe
machine.Ifyouoperatethemachineinreversewiththe
blades(PTO)engaged(i.e.,withthemowerbladesorother
attachmentrunning),theenginewillstop.Donotmowin
reverseunlessitisabsolutelynecessary.
Ifyouneedtousetheblades(PTO)whilebackingup,turn
offtheinterlockfeatureusingtheKeyChoiceswitchlocated
neartheseatbracket(
Figure13).
13