Hauling the Machine (continued)
G414592
4. Back the machine up the ramp.
5. Shut off the machine, remove the key, and
engage the parking brake.
G027708s
6. Tie down the machine using straps, chains,
cable, or ropes. Refer to local regulations for
tie-down requirements.
Note: Ensure to tie down the battery box so
that it does not open during transport.
Unloading the Machine
G414593
1. Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 15 degrees.
2. Drive the machine forward down the ramp.
Operation: After Operation Page 4–20 3463-565 A
To Next Page