Toro Flex-Force Power System 39901 - Installing the Chute-Control Rod; Product Overview; Key Components; Specifications

4
InstallingtheChute-Control
Rod
Partsneededforthisprocedure:
1
Chute-controlrod
Procedure
1.Ensurethatthechuteisfacingforward(Figure
7).
2.Withthehandlefacingforward,installthe
chute-controlrodintotheguideandpushitdown
untilitsnapsintoplace(Figure7).
g282249
Figure7
1.Chute-controlguide3.Chute-controlhandle
2.Chute-controlrod
ProductOverview
g318456
Figure8
1.Dischargechute6.Headlight
2.Chutedeector7.ECOswitch
3.Chute-deectorhandle
8.Electric-startbutton
4.Battery-compartmentlid9.Bail
5.Chute-controlrod
10.Rotorblades
Specications
AppropriateTemperatureRanges
Charge/storethebatterypack
at
5°C(41°F)to40°C(104°F)*
Usethemachineat
-30°C(-22°F)to23°C(73°F)*
Storethemachineat-30°C(-22°F)to49°C(120°F)*
*Chargingtimewillincreaseifyoudonotchargethe
batterywithinthisrange.
Storethemachine,batterypack,andbatterycharger
inanenclosedclean,dryarea.
10