Toro Flex-Force Power System 39901 - Unfolding the Handle

2
UnfoldingtheHandle
NoPartsRequired
Procedure
1.Removethemachinefromthebox.
2.Unfoldtheupperhandleandallowtheupper
handleknobstosnapintoplace(AofFigure3).
3.Tightenthehandleknobs(BofFigure3).
g282574
Figure3
4.Removethelowerhandleknobsfrombothsides
ofthemachine(Figure4).
Note:Thelowerknobsareinstalledtoaweld
nutinthesideofthemachine.
g303594
Figure4
Rightsideshown
1.Lowerhandleknob
5.Movethelowerhandleintoplaceandinstallthe
lowerhandleknobsasshowninFigure5.
Note:Youmayuseawrenchonthehexonthe
outsideoftheknobtotightentheknob.
Important:Tightentheknobsuntilthe
handlebartouchesthesideplatewithnogap.
g303595
Figure5
1.Alignthelowerhandlewith
theweldnuts.
2.Installthelowerhandle
knobs.
8