EasyManuals Logo

Toro Flex-Force Power System 60V User Manual

Toro Flex-Force Power System 60V
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Problem
Possible Cause Corrective Action
The LED indicator light on the battery
charger is red.
1. The battery charger and/or battery
pack is over or under the appropriate
temperature range.
1. Unplug the battery charger and move
the battery charger and battery pack
to a place where it is dry and the
temperature is between 5°C (41°F)
and 40°C (104°F).
1. There is an error in the communication
between the battery pack and the
charger .
1. Remove the battery pack from the
battery charger , unplug the battery
charger from the outlet, and wait 10
seconds. Plug the battery charger into
the outlet again and place the battery
pack on the battery charger . If the LED
indicator light on the battery charger is
still blinking red, repeat this procedure
again. If the LED indicator light on
the battery charger is still blinking red
after 2 attempts, properly dispose of
the battery pack at a battery recycling
facility .
The LED indicator light on the battery
charger is blinking red.
2. The battery pack is weak.
2. Contact your authorized service dealer
if the battery is in warranty , or properly
dispose of the battery pack at a battery
recycling facility .
24

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toro Flex-Force Power System 60V and is the answer not in the manual?

Toro Flex-Force Power System 60V Specifications

General IconGeneral
BrandToro
ModelFlex-Force Power System 60V
CategoryPole Saw
LanguageEnglish

Related product manuals