EasyManuals Logo
Home>Toro>Pole Saw>Flex-Force Power System 60V

Toro Flex-Force Power System 60V User Manual

Toro Flex-Force Power System 60V
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
For assistance, please see
www .T oro.com/support
for instructional videos
or contact 1-888-384-9939
before returning this
product.
W ARNING
CALIFORNIA
Proposition 65 W arning
The power cord on this product contains
lead, a chemical known to the State
of California to cause birth defects
or other reproductive harm. W ash
hands after handling.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer , birth defects,
or other reproductive harm.
Introduction
This pole saw is designed for trimming small branches
and limbs up to 6 inches (15.2 cm) in diameter . It is to
be used only by adults. It is designed to use T oro 60V
lithium-ion battery packs. These battery packs are
designed to be charged only by T oro 60V lithium-ion
battery chargers. Using these products for purposes
other than their intended use could prove dangerous
to you and bystanders.
Important: If you are using this machine with a
battery pack that is 4.0 Ah or greater you must
install the included quick-release harness for
proper support and balance.
Do not use other harnesses or multiple harnesses
when operating the machine.
Model 51870T does not include a battery or a
charger .
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. Y ou are responsible for
operating the product properly and safely .
V isit www .T oro.com for more information, including
safety tips, training materials, accessory information,
help nding a dealer , or to register your product.
Whenever you need service, genuine T oro parts, or
additional information, contact an Authorized Service
Dealer or T oro Customer Service and have the model
and serial numbers of your product ready . Figure 1
identies the location of the model and serial numbers
on the product. W rite the numbers in the space
provided.
Important: W ith your mobile device, you can
scan the QR code (if equipped) on the serial
number plate to access warranty , parts, and other
product information.
g425378
Figure 1
1. Model and serial number location.
Model No.
Serial No.
© 2023—The T oro® Company
81 1 1 L yndale A venue South
Bloomington, MN 55420
2
Contact us at www .T oro.com.
Printed in China
All Rights Reserved

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toro Flex-Force Power System 60V and is the answer not in the manual?

Toro Flex-Force Power System 60V Specifications

General IconGeneral
BrandToro
ModelFlex-Force Power System 60V
CategoryPole Saw
LanguageEnglish

Related product manuals