Toro Flex-Force Power System - Specifications; Operation; Before Using the Chain Saw

Specications
Model
51850/51850T
BarLength(with88613and
88614equipped)
40.6cm(16inches)
ChainGauge(with88613
and88614equipped)
0.043inches
ChainPitch(with88613and
88614equipped)
3/8inch
ChainLength(with88613
and88614equipped)
56links
RatedVoltage
60VDCmaximum,54VDC
nominalusage
Weight(withoutabattery)4.35kg(9.59lb)
ChargerType
88602
BatteryType88625,88640,88660,or
88675
AppropriateTemperatureRanges
Charge/storethebatterypack
at
5°C(41°F)to40°C(104°F)*
Usethebatterypackat
-30°C(-22°F)to49°C(120°F)*
Usethetoolat
0°C(32°F)to49°C(120°F)*
*Chargingtimewillincreaseifyoudonotchargethe
batterywithinthisrange.
Storethetool,batterypack,andbatterychargerinan
enclosedclean,dryarea.
Operation
BeforeUsingtheChainSaw
Beforeusingthechainsaw,dothefollowing:
•Checkthechaintension;refertoAdjustingthe
ChainT ension(page21).
•Cleanthechainsawcomponents,inspectthemfor
excessivewearordamage,andreplacethemas
needed;refertoServicingtheGuideBar,Chain,
andDriveSprocket(page22).
•Checkthechainforsharpnessanddamage,and
sharpenorreplaceasneeded;refertoSharpening
theChain(page23).
•Checktheoillevel;refertoCheckingtheOilLevel
andAddingBarandChainOil(page19).
•Checkthechainbrake;refertoCheckingthe
ChainBrake(page20).
•Checkthechainsawfordamage,general
appearance,andperformance;ensurethatthe
switchesmovefreely,theventsandhandlesare
clean,andthebarisnotbentordamaged.
10