Toro Flex-Force Power System - Starting the Chain Saw; Shutting Off the Chain Saw

StartingtheChainSaw
1.Ensurethattheventsonthechainsawarefree
fromdustanddebris(Figure8).
g315701
Figure8
1.Sidevent
2.Bottomvent
2.Setthechainsawdownonalevelsurface.
3.Alignthetongueofthebatterypackwiththe
batterycavityinthechainsaw(Figure9).
g315702
Figure9
4.Pushthebatterypackintothebatterycavityuntil
thebatterypacklocksintoplace.
5.Removetheprotectivecoverfromthechain.
6.EnsurethatthechainbrakeisintheOPERATING
position(Figure10).
g315703
Figure10
1.Chainbrake(OPERATING
position)
2.Chainbrake(STOP
position)
7.Withyourlefthandonthefronthandleandyour
righthandontherearhandle,pressthetrigger
lock,thensqueezethetrigger(Figure11).
g315704
Figure11
1.Fronthandle4.Trigger
2.Chainbrake
5.Rearhandle
3.Triggerlock
ShuttingOfftheChainSaw
Toshutoffthechainsaw,releasethetrigger.
Wheneveryouarenotusingthesaworare
transportingthesawtoorfromtheworkarea,move
thechainbraketotheSTOPposition(Figure10)and
removethebatterypack.
11