Toro GrandStand 74574 - Operating the Mower-Blade-Control Switch (PTO); Operating the Throttle; Operating the Choke

Operatingthe
Mower-Blade-ControlSwitch
(PTO)
Theblade-controlswitch(PTO)isusedinconjunctionwith
therightsidemotion-controllevertoengageanddisengage
themowerblades.
EngagingtheMowerBlades(PTO)
1.Toengagethemowerblades,movetherightside
motion-controllevertothecenter,unlockedposition.
2.Pulltheblade-controlswitch(PTO)upandreleaseit
whileholdingdowntherightsidemotion-controllever
inthecenter,unlockedposition.
G008945
Figure10
DisengagingtheMowerBlades(PTO)
Thefollowingaretwooptionsfordisengagingthemower
blades.
•Pushtheblade-controlswitch(PTO)downtotheOff
position.
•Movethemotion-controlleverstoneutralandmove
therightsidemotion-controlleverintotheneutral-lock
position.
G009174
Figure11
OperatingtheThrottle
ThethrottlecontrolmovesbetweenFastandSlowpositions
(Figure12).
AlwaysusetheFastpositionwhenturningonthemower
deckwiththeblade-controlswitch(PTO).
G008946
Figure12
OperatingtheChoke
Usethechoketostartacoldengine.
1.Iftheengineiscold,usethechoketostarttheengine.
2.Pulluponthechokeknobtoengagethechokebefore
usingtheignitionswitch(Figure13).
3.Pushdownonthechokeknobtodisengagethechoke
aftertheenginehasstarted(Figure13).
G008959
1
2
Figure13
1.Onposition2.Offposition
17