Toro Greensmaster 3250-D - Setup Procedures; Loose Parts Verification; Initial Assembly Steps; System Preparation Steps

Greensmaster 3250--D Page 2 -- 1 Product Records and Maintenance
Chapter 2
Product Records and Maintenance
Table of Contents
PRODUCT RECORDS 1.........................
MAINTENANCE 1...............................
EQUIVALENTS AND CONVERSIONS 2...........
Decimal and Millimeter Equivalents 2............
U.S. to Metric Conversions 2...................
TORQUE SPECIFICATIONS 3....................
Fastener Identification 3.......................
Using a Torque Wrench with an Offset Wrench 3..
Standard Torque for Dry, Zinc Plated and
Steel Fasteners (Inch Series). 4...............
Standard Torque for Dry, Zinc Plated and
Steel Fasteners (Metric Fasteners). 5..........
Other Torque Specifications 6..................
Conversion Factors 6..........................
Product Records
Insert a copy of the Operator’s Manual and Parts Cata-
log for your Greensmaster 3250--D at the end of this
chapter. Additionally, if any optional equipment or ac-
cessories have been installed to your machine, insert
the Installation Instructions, Operator’s Manuals and
PartsCatalogsforthoseoptionsattheendofthischap-
ter.
Maintenance
Maintenanceproceduresandrecommendedservicein-
tervalsfortheGreensmaster3250--Darecoveredinthe
Operator’s Manual. Refer to this publication when per-
forming regular equipment maintenance.
Product R ecords
and Maintenance