Toro Greensmaster Flex 1021 - Adjustments; Adjusting the Reel Drive Belt

Adjustments
g312311
Figure20
1.Reeldriveboxassembly
4.CarriageBolt7.Socketheadscrew(4each)
2.Reelbelt
5.Gasket
3.Idlerarm6.Reeldrivecover
AdjustingtheReelDriveBelt
1.Parkthemachineonalevelsurface.EnsurethattheengineisOFF .Remove
thesparkplugwirefromtheenginesparkplug.
2.Removethe4socketheadscrews(7)thatsecuresthereeldrivecover(6)
tothereeldriveassembly(1)andremovethereeldrivecovertoexpose
thereeldrivebelt(2).
3.Checkthereelbelt(item2inFigure20)tensionbydepressingatmidspan
betweenpulleyswith18to22N(4to5lbs)offorce.Thebeltshoulddeect
6.35mm(0.25inch).Ifdeectionisincorrect,proceedtonextstep.If
deectioniscorrect,continueoperation.
Greensmaster
®
Flex1018/1021
Page5–3
TractionandReelDriveSystems:Adjustments
20247SLRevA