Greensmaster Flex 21
Page 6 – 11
Chassis and Controls
1. Cap screw
2. Lock washer
3. Shallow rim
4. Tire
5. Hub
6. Wheel locking clip
7. Spring
8. Bolt
9. Bolt
10. Deep rim
11. Inner tube
12. Cap screw
13. Flange nut
Figure 16
1
2
3
4
5
6
7
8
9
10
11
12
13
Disassembly
1. Remove three cap screws and lock washers from the
shallow rim and hub. Remove hub from deep rim.
2. Remove four cap screws and flange nuts from the
deep rim and shallow rim. Remove shallow rim from the
deep rim.
3. Remove bolt from the hub. Remove bolt, spring, and
locking clip from the hub.
Reassembly
1. Reinstall locking clip, spring, and bolt to the hub. Re-
install bolt to the hub. Tighten both bolts.
2. Reinstall shallow rim into the deep rim. Secure shal-
low rim to the deep rim with the four cap screws and
flange nuts. Tighten fasteners.
3. Reinstall hub into deep rim. Secure hub to deep rim
with three cap screws and lock washers. Tighten fasten-
ers.
Chassis and
Controls
To Next Page
Loading...
