Toro Greensmaster Flex 2100 - Installing the Cutting Unit to the Traction Unit

Note:Makesurethatyoubendthelegsofthe
cotterpinsothatthepindoesnotfalloutofthe
adjusterpin.
g033273
Figure19
1.Cotterpin
3.Adjuster-armassembly
rod
2.Groomerdrivebox
4.Adjusterpin
4.Aligntheadjuster-armassemblyrodnearthe
idlerassemblywiththeadjustercollaronthe
idlerassemblyandsecureitwithanadjusterpin
andcotterpin(Figure20).
Note:Makesurethatyoubendthelegsofthe
cotterpinsothatthepindoesnotfalloutofthe
adjusterpin.
g031457
Figure20
1.Cotterpin
3.Adjuster-armassembly
rod
2.Adjustercollar4.Adjusterpin
5.Insertandcenterthefrontrollershaftbetween
theheight-of-cutbracketsandsecureitwith
the2mountingscrewsremovedfromtheold
height-of-cutbrackets(Figure21).
g231793
Figure21
1.Mountingscrew
3.Groomerguard
2.Height-of-cutbracket
assembly
6.Attachthegroomerguardstoeithersideofthe
frontrollershaft(Figure21).
7.Torquethegroomerguardsto22to24N∙m(16
to18ft-lb).
10