12
106-0391
1. Engine—stop
2. Engine—run
3. Engine—start
4. Flow divider
5. Forward
6. Reverse
7. Engage the power take-off
(PTO).
8. Disengage the power
take-off (PTO)
9. Transmission—high speed
10. Transmission—low speed
11. Forward machine speeds
12. Press the button to set the
cruise control
13. Cruise control
14. On
15. Off
16. Headlights
17. Push the button to over-ride
an overheated engine
shutdown.
18. To start the engine, move
the traction pedal to Neutral,
press the brake pedal, move
the throttle lever to Slow,
and then turn the ignition key
to Start; read the Operators
Manual.
19. To engage the PTO, pull up
on the PTO switch and move
it forward.
20. To stop the engine,
disengage the PTO, move
the throttle lever to slow, set
the parking brake, turn the
ignition key to Stop, and
remove the key; read the
Operators Manual.
21. To switch the transmission to
high speed, raise the
attachment lift.
To Next Page
Loading...
