Toro Groundsmaster 5900 Series Installation Instructions

9
VerifyingthattheMachine
isinCEMode
NoPartsRequired
Procedure
1.Startthemachine.
2.FromtheInfoCentermainmenu,navigatetothe
Aboutscreen(Figure26).
g188853
Figure26
3.VerifythatthemachineisinCEmode.Ifitisnotin
CEmode;contactyourAuthorizedServiceDealer
(Figure27)
g188852
Figure27
Operation
UsingtheLightandHazard
Switches
•Turnthekeyswitchonandpressthelightswitchtothe
ONpositiontoactivatetheheadlamps.
•PressthehazardswitchtotheONpositiontoactivatethe
frontandrearashinghazardlights.
•Turnthekeyswitchonandpresstheleftsideoftheturn
signalswitchtoactivatetheleftturnsignalandtheright
sideoftheswitchtoactivatetherightturnsignal.The
centerpositionisoff.
Note:Checktheoperationofthelights.Makesurethat
thecorrectlightsareashingwhenoperatingtheturn
signalswitch.
AimingtheHeadlights
1.Loosenthemountingnutstoadjustthelights.
2.Adjustthelightsperlocalstandards.
12

Toro Groundsmaster 5900 Series Specifications

General

Deck Lift	Hydraulic
Cutting Width	16 ft (4.9 m)
Drive System	4WD
Cutting Height	1 - 6 inches (2.5 - 15.2 cm)
Ground Speed	0-17 mph (0-27.4 km/h)
Transmission	Hydrostatic
Turning Radius	Zero-turn
Standard Tires	26 x 12-12