Toro HoverPro 550 - Attachments;Accessories; Specifications; Controls

Controls
g364793
Figure19
1.Operator-presencebail2.Fuel-shutoffvalve
Operator-PresenceBail
Theoperator-presencebail(Figure19)controlsthe
ywheelbrakeandignitionoftheengine.
•Squeezethebailtothehandlebartorunthe
engine.
•Releasethebailtothehandlebartoshutoffthe
engine.
Fuel-ShutoffValve
Usethefuel-shutoffvalve(Figure19)tocontrolthe
owoffueltotheengine.
•Closethefuel-shutoffvalvewhenyoutransport,
maintain,orstorethemachine.
•Openthefuel-shutoffvalvetoruntheengine.
Specications
Model
Cuttingwidth
Productwidth
02617
53cm(21inches)63.5cm(25inches)
Attachments/Accessories
AselectionofT oroapprovedattachmentsand
accessoriesisavailableforusewiththemachine
toenhanceandexpanditscapabilities.Contact
yourAuthorizedServiceDealerorauthorizedToro
distributororgotowww.https://www.toro.com/en-GB
foralistofallapprovedattachmentsandaccessories.
Toensureoptimumperformanceandcontinuedsafety
certicationofthemachine,useonlygenuineToro
replacementpartsandaccessories.Replacement
partsandaccessoriesmadebyothermanufacturers
couldbedangerous,andsuchusecouldvoidthe
productwarranty.
10