Toro HoverPro 550 - Adding Oil to the Engine

g367358
Figure12
5.Securethehandlebarttingtotheupper
handlebar(Figure13)withthebolt(1/4x1-3/4
inches)andlocknut(1/4inch).
g367354
Figure13
1.Bolt(1/4x1-3/4inches)3.Handlebartting
2.Upperhandlebar
4.Locknut(1/4inch)
3
AddingOiltotheEngine
NoPartsRequired
Procedure
Important:Yourmachinedoesnotcomewithoil
intheengine.Beforestartingtheengine,addoil
totheengine.
APIServiceClassication:SJorhigher
OilViscosity:10W-30oil
OilCapacity:0.40L(13.5oz)
1.Movethemachinetoalevelsurface.
2.Removethedipstickfromtheoil-llerneckand
wipethedipstickwithacleanrag(Figure14).
g364715
Figure14
3.Slowlypourthespeciedengineoilintothe
oil-llerneck(Figure15),andwait3minutes.
8