Name: Toro Hydroject 3000
Brand: Toro
Rating: 5 (1 reviews)

TORO Hydroject® 3000/4000 Components

NOTES

____________________________________________________________________________________________________________

13

Tiller Controls (3000 Hydroject® Only)

The tiller handle contains some controls for aerating. These controls include traction direction, aerate-transport

switch, and water systems start and stop buttons, and the parking brake lever.

NOTE: The parking brake is connected to a limit switch that activates an alarm if the unit

is moved while the parking brake is engaged.

NOTE: The traction handle moves the swash plate on the hydrostat, controlling direction

and speed.

NOTE: The raise and lower switch positions the transport wheels in aerate or transport.

NOTE: The ENGAGE (Green) and DISENGAGE (Red) buttons start and stop the water pump and

cycling valve. Holding the ENGAGE button down will energize the water system, overriding the

neutral delay, allowing multiple shots at one location.

Remote Control Panel (4000 Hydroject® Only)

The remote control panel for the Hydroject® 4000 contains the controls for aerating.

These controls include:

1. The key switch.

2. The engine choke switch.

3. The engine low\high idle switch.

4. The water system, start and stop buttons.

NOTE: The ENGAGE (Green) and DISENGAGE (Red) buttons start and stop the water pump and

cycling valve.

Toro Hydroject 3000 Troubleshooting Guide

Other manuals for Toro Hydroject 3000