Name: Toro Hydroject 3000
Brand: Toro
Rating: 5 (1 reviews)

TORO Hydroject® 3000/4000 Components

NOTES

____________________________________________________________________________________________________________

31

Water Filter

The water filter is a replaceable 5-micron cartridge filter located in a blue plastic housing.

It is located under the machine on the Hydroject® 3000 and on the top left side on the Hydroject® 4000.

NOTE: NEVER OPERATE THE MACHINE WITH OUT THIS FILTER. The filter stops harmful particles

from entering the high-pressure water system.

Filter Element PN. 86-8630.

O-Ring PN. 92-9543.

Water Filter Replacement

When the water pressure gauge reads low water pressure, this indicates that the water filter needs to be

serviced.

Remove the filter body with the filter wrench and discard the old filter element.

Thoroughly clean the body and inspect the sealing O-Ring.

Install a new filter and lubricate the sealing O-Ring with a light coat of petroleum jelly.

Thread the filter body into the filter head, and hand tighten.

NOTE: Water quality will affect the service life of the filter.

NOTE: A filter wrench is included with each machine.

Toro Hydroject 3000 Troubleshooting Guide

Other manuals for Toro Hydroject 3000