Toro Hydroject 3000 - Water Flow through the System

TORO Hydroject® 3000/4000 Water System Operation
NOTES
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
53
Water Flow Through the System
1. Water enters the unit through the pre-filter.
2. The water then flows to the engine driven pump.
3. The water flow is stopped at the cycling valve and is forced into the accumulator.
4. When the cycling valve opens, the water is allowed to flow to the nozzles.