Toro Hydroject 3000 - Water Cycling Valve

TORO Hydroject® 3000/4000 Components
NOTES
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
41
Water Cycling Valve
The water cycling valve is connected to the bottom of the accumulator.
The cycling valve is a cam driven valve.
The cycling valve releases the high-pressure water to the injection nozzles. The cycling valve opens at a rate of
5.3 times a second.
NOTE: The water is released as the spool, Item 2, lifts off the seat, Item 1.