Toro LoRa Tempus Air CT - Associate Tempus Air CT Controller; Security Key Usage; Pair with Tempus Air BS;BR;BW

Toro Tempus Air CT
Step 2
Step 3
PAIRING with Tempus Air BS - BR - BW
To optimize the LoRa
TM
radio connection between the Tempus Air BS/BR/BW and the Tempus Air CT controllers,
we advise to install the Tempus Air CT under 800 meters to the Tempus Air BS/BR/BW. We also advise to
associate all your Tempus Air Controller near the Tempus Air BS/BR/BW before installing them in the valve
boxes.
ASSOCIATION
1. Unscrew the Tempus Air CT ’s cap
2. Plug the 9V 6LR61 ou 6AM6 battery and screw the cap
3. Launch MyToroTempus app from your smartphone or tablet.
4. Click on the «Add a controller» button or on the «+» button
5. Choose the Tempus Air CT from the availade controllers list.
6. (Optional) Define a name and a security key for your controller and click on the button «Validate».
7. To finish your Tempus Air CT pairing, follow the next steps described in the app.
Note: To identify your Tempus Air CT among the nearby controllers, please refer to the «Default name» present
on its product label.
Security key
The security key allows to protect your controller. You can define it during the step 6 of the «ASSOCIATION» or
access to further information by clicking on the icon at the top right of your screen.
1. On the MyToroTempus mobile App, select your Tempus Air BS/BR/BW, and enter pairing mode on the Infor-
mation screen. (You must be connected via Bluetooth)
2. Select the Tempus Air CT previously installed.
3. Click on
the top right icon to access to the product’s informations.
4. Click on «Remote Access».
5. Select the Tempus Air BS/BR/BW you want to pair the controller with.
6. Click on the button «Send» or on the bottom of your screen to validate. Once the pairing finished, you
can test the connection between your Tempus Air BS/BR/BW and your Tempus Air CT
7. Go back to «Remote access» screen.
8. Click on the button to start the test.
Note:
- The message «Connection established» means that the connection is reliable.
- The message «No connection established» means that it is necessary to bring the Tempus Air CT closer to
the Tempus Air BS/BR/BW or vice versa.
3