Toro Power Clear 621 User Manual

SPECIFICATIONS & MAINTENANCE
2-6
Toro Single Stage Snow Service Manual
Maintenance Service Interval Maintenance Procedure
After the rst hour
Check the control cable and adjust it if necessary.
Check for loose fasteners and tighten them if necessary.
After the rst 2 hours Change the engine oil.
Before each use or daily Check the engine oil level and add oil if necessary.
Yearly
Check the control cable and adjust it if necessary.
Inspect the rotor blades and replace the rotor blades and
scraper if necessary.
Change the engine oil.
Service the spark plug and replace it if necessary.
Check for loose fasteners and tighten them if necessary.
Inspect the drive belt and replace it if necessary.
Yearly or before storage Prepare the machine for storage.
Power Clear
®
418 (18 Inch Models)
Recommended Maintenance Schedule(s)
Maintenance
NOTE
Determine the left and right sides of the machine from the normal operating position.

Toro Power Clear 621 Specifications

General

Engine Type	4-Cycle
Engine Displacement	212cc
Fuel Type	Gasoline
Clearing Width	21 inches
Throw Distance	35 feet
Starting System	Recoil
Chute Control	Manual
Drive System	Power Propel
Warranty	2-Year Full Coverage