Toro Power Clear 621 - Chassis Procedures; 18 Inch Shroud Removal

CHASSIS
3-15
Toro Single Stage Snow Service Manual
3. Remove the shroud screws and fuel cap and remove
the shroud. Reinstall fuel cap (Fig. 016).
18 Inch Shroud Removal
Fig. 016
1. Remove key from ignition. Remove the screws
securing the lower shrouds (A). Remove the right and
left lower shrouds (B) (Fig. 014).
2. Remove the belt cover. Disconnect the clutch cable
from the belt guide. Slide the cable through
the housing (Fig. 015).
Fig. 014
B
A
A
A
A
B
B
Fig. 015
Chassis
3