Toro Power Clear 621 - 21 Inch Rotor Removal & Replacement

POWER PROPEL SYSTEM
Toro Single Stage Snow Service Manual
4-8
1. Remove the belt cover. Remove the drive belt (A)
and the rotor pulley (B) (Fig. 015).
2. Remove the three rotor bearing screws on the belt
side of the housing (Fig. 016).
21 Inch Rotor Removal & Replacement
3. Remove the three rotor bearing screws on the
opposite side of the housing (Fig. 017).
4. Remove the rotor assembly from the housing.
(Fig. 018).
Fig. 017
Fig. 015
Fig. 016
Fig. 018
B
A